by | Aug 23, 2016 | ID Badge and Door Programming
Step 1: Open up Onity Client located on the Start menu. Step 2: Log into Onity. Step 3: Click on Data then Doors Step 4: Click the green + button in the middle of the screen Step 5: Fill out Name, Description, and set the Building name. Step 6: IF you wish to set the...
by | Feb 16, 2016 | ID Badge and Door Programming
** This is after you have created the ID card in Photoshop, using the approved templates ** 1. Load blank ID into card printer, blank side down, Mag strip up toward the front of the machine. (Image is also on the card reader) 2. Click File, Print. 3. When the print...
by | Feb 10, 2016 | ID Badge and Door Programming
If an ID is broken, lost, damaged, or unusable it is to be treated as creating a NEW USER and NEW ID. Every effort should be made to recover the ID if it is damaged or unusable. Delete the previous user from Onity before creating the new user with the same name. Every...
by | Feb 10, 2016 | ID Badge and Door Programming
Step 1: Open up Onity Client located on the Start menu. Step 2: Log into Onity. Step 3: Click Data, from the menu bar, then Users. Step 4: Find the User you wish to modify and double click on said user. Step 5: Click on the “Locking Plan” button. Step 6:...
by | Feb 4, 2016 | ID Badge and Door Programming
Step 1: Open up Onity Client located on the Start menu. Step 2: Log into Onity. Step 3: Click on ‘Communications’ on the top menn, then click on XPP. Step 4: Turn the hand programmer on. Step 5: Once the programmer is on, click on connect on the computer screen Step...
by | Feb 4, 2016 | ID Badge and Door Programming
Step 1: Open up Onity Client located on the Start menu. Step 2: Log into Onity. Step 3: Click on Data from the menu bar, then select Users. Step 4: Click the ‘green’ + button to create a new user. Step 5: Enter in First Name, Last Name, ID Number (which is the same as...
